v30 bugs Topic is solved

Talk about code development, features, specific bugs, enhancements, patches, and similar things.
Forum rules
Please keep everything here strictly on-topic.
This board is meant for Pale Moon source code development related subjects only like code snippets, patches, specific bugs, git, the repositories, etc.

This is not for tech support! Please do not post tech support questions in the "Development" board!
Please make sure not to use this board for support questions. Please post issues with specific websites, extensions, etc. in the relevant boards for those topics.

Please keep things on-topic as this forum will be used for reference for Pale Moon development. Expect topics that aren't relevant as such to be moved or deleted.
User avatar
snotty
Hobby Astronomer
Hobby Astronomer
Posts: 18
Joined: 2018-09-01, 21:37
Location: Austria

v30 bugs

Unread post by snotty » 2022-03-18, 01:01

first glance:
quickdial is utterly empty
tab mix plus setting for tab width is ignored

User avatar
Moonchild
Pale Moon guru
Pale Moon guru
Posts: 35402
Joined: 2011-08-28, 17:27
Location: Motala, SE
Contact:

Re: v30 bugs

Unread post by Moonchild » 2022-03-18, 01:19

snotty wrote:
2022-03-18, 01:01
quickdial is utterly empty
WORSFORME
Attachments
quickdial1.png
"Sometimes, the best way to get what you want is to be a good person." -- Louis Rossmann
"Seek wisdom, not knowledge. Knowledge is of the past; wisdom is of the future." -- Native American proverb
"Linux makes everything difficult." -- Lyceus Anubite

User avatar
snotty
Hobby Astronomer
Hobby Astronomer
Posts: 18
Joined: 2018-09-01, 21:37
Location: Austria

Re: v30 bugs

Unread post by snotty » 2022-03-18, 01:47

Quickdial - Pale Moon 18.03.2022 024521.jpg

User avatar
somdcomputerguy
Lunatic
Lunatic
Posts: 381
Joined: 2014-02-23, 17:25
Location: Greenbrier County, West Virginia
Contact:

Re: v30 bugs

Unread post by somdcomputerguy » 2022-03-18, 02:18

Well I agree with the TMP width issue, I experience it also, but it seems that's the only issue I've found with this extension. I'm not too worried about it though.. :coffee: I can't say anything about quick dial issues, as I don't use that 'feature'.
:cool: -bruce /* somdcomputerguy.com */
'If you change the way you look at things, the things you look at change.'

User avatar
Trippynet
Fanatic
Fanatic
Posts: 238
Joined: 2014-06-03, 20:21
Location: UK

Re: v30 bugs

Unread post by Trippynet » 2022-03-18, 08:23

Same issue here for me with TMP. It doesn't seem to be working at all as I've also lost the individual "close" icons on each tab. Tried re-installing the extension from the PM Extensions page, no effect :(

User avatar
Kand_in_Sky
Fanatic
Fanatic
Posts: 127
Joined: 2013-01-02, 18:22
Location: DE

Re: v30 bugs

Unread post by Kand_in_Sky » 2022-03-18, 09:21

Oh wow! PM30 is really a milestone, clearly faster on my not-so-new AMD 2015 QuadCore
congratulations & thanks :-)

for the bugs (not really bugs)
- Notebook Win7: Quickdial is empty
- PC Win7: Quickdial works (main PC)
- PC Win10: Quickdial works

Language is set to english, and yes
-> language pack is installed
-> general.useragent.locale is set to de

- the polyfill add-on does not work, only because of the new GUID
upd1.png
upd2.png

for TMP: i use Tab Utilies Phoenix, there are no problems in PM30 so far
https://addons-legacy.palemoon.org/addo ... s-phoenix/


all in all: PM30 rocks :-D


edit:
fyi: mobile site mdr.de still crashes --> viewtopic.php?f=7&t=27931
but as was me the only one with this problem, not really a bug
PaleMoon & Basilisk
- on 2014 i5-4210M Notebook 8GB Win7 64Bit
- on 2014 Athlon 5350 16GB PC Win7 64Bit
- on 2018 Athlon200GE 32GB PC Win10 64Bit

User avatar
Moonchild
Pale Moon guru
Pale Moon guru
Posts: 35402
Joined: 2011-08-28, 17:27
Location: Motala, SE
Contact:

Re: v30 bugs

Unread post by Moonchild » 2022-03-18, 10:32

As for the quickdial: did you inadvertently click the "grid" icon in the top right? because that would result in your display shown, when disabling the grid.
"Sometimes, the best way to get what you want is to be a good person." -- Louis Rossmann
"Seek wisdom, not knowledge. Knowledge is of the past; wisdom is of the future." -- Native American proverb
"Linux makes everything difficult." -- Lyceus Anubite

User avatar
snotty
Hobby Astronomer
Hobby Astronomer
Posts: 18
Joined: 2018-09-01, 21:37
Location: Austria

Re: v30 bugs

Unread post by snotty » 2022-03-18, 11:08

grid symbol untouched, empty quickdial stays empty when grid thing clicked (win7 PC)
i can not put new stuff there is the bigger problem. dragging a bookmark there opens the page.

tab-mix plus is one of two reasons i'm using palemoon (old search being the other), limiting tab width - for me - is essential :(
as to the close icons: the close buttons on tabs only appear on active tabs now, not on hover.

User avatar
sidology
Moon lover
Moon lover
Posts: 79
Joined: 2021-12-04, 22:07

Re: v30 bugs

Unread post by sidology » 2022-03-18, 12:15

snotty wrote:
2022-03-18, 11:08
tab-mix plus is one of two reasons i'm using palemoon (old search being the other), limiting tab width - for me - is essential :(
viewtopic.php?f=46&t=27969&p=224853#p224853

unknownone
Moonbather
Moonbather
Posts: 52
Joined: 2017-03-29, 00:15

Re: v30 bugs

Unread post by unknownone » 2022-03-18, 17:51

I also have an empty quickdial with only the search box after upgrading to v30 and the individual "close" icons on each tab are not visible until clicking on each specific tab. Another issue is that passwords are not auto-filled.

User avatar
Cassette
Lunatic
Lunatic
Posts: 395
Joined: 2015-05-08, 14:30
Location: Wichita, KS

Re: v30 bugs

Unread post by Cassette » 2022-03-18, 18:46

The only thing I've found to get the quickdial to work again is to create a new profile. I've tried resetting the various newtab settings, even clearing out the pinned pages to start fresh, still nothing. Something about the upgrade process is broken there.

Edit: It appears the privacy.donottrackheader.enabled setting is also connected to the quickdial not working. After resetting it, then restarting the browser, quickdial works again.

User avatar
Moonchild
Pale Moon guru
Pale Moon guru
Posts: 35402
Joined: 2011-08-28, 17:27
Location: Motala, SE
Contact:

Re: v30 bugs

Unread post by Moonchild » 2022-03-18, 21:51

Perhaps @RealityRipple can dive into this privacy.donottrackheader.enabled issue since it was his code that was used to base the GPC implementation and removal of DNT on. It's probably something simple that just breaks a piece of front-end, but no less annoying anyway, of course.
The pref serves no purpose and if it wasn't for a typo on my end it would actually have been automatically cleared upon upgrade... and nobody would even have known about this :P
"Sometimes, the best way to get what you want is to be a good person." -- Louis Rossmann
"Seek wisdom, not knowledge. Knowledge is of the past; wisdom is of the future." -- Native American proverb
"Linux makes everything difficult." -- Lyceus Anubite

User avatar
Trance-M
Newbie
Newbie
Posts: 4
Joined: 2022-03-22, 10:37

Re: v30 bugs

Unread post by Trance-M » 2022-03-22, 10:52

Since normally keep 50+ tabs open in Pale Moon I need to scroll through tabs a lot.
The "Tab" button for scrolling through tabs to the left now is at the right side next the to button the scroll to the right.
I liked it at the left side as some quick click on it scroll the open tabs quickly to the first tab.
Not only it moved to the right, the button to the left behaves differently from the right to the right.
I still can scroll quickly to the right by some quick clicks, but not to the left. The tabs just scrolls a little to the left and then back to the right.
Anyone else noticed this?

User avatar
SzakiLaci
Newbie
Newbie
Posts: 5
Joined: 2022-03-24, 12:25

Re: v30 bugs

Unread post by SzakiLaci » 2022-03-24, 12:49

I'm using Pale Moone since many years, and NEVER had any problems with it.
Until v30 came out.

Every 5th or 10 click I get a screen like this:
cache error.jpg
Instead of that:
normal view.jpg
It seems like the cache is not used properly.
(Currently searching a way to downgrade back to 29.4.4)


Ps: I'm a programmer since 35 years. I hate the current world turning into a global "every user is a test-subject" behavior. :-(
Ps2: I'm using Pale Moon for one page only: https://www.pardus.at Nothing else, because this browser is still supporting Greasemonkey + Pardus scripts.



Application Basics
------------------

Name: Pale Moon
Version: 30.0.1 (32-bit)
Build ID: 20220319211940
Update Channel: release
User Agent: Mozilla/5.0 (Windows NT 6.1; WOW64; rv:68.0) Gecko/20100101 Goanna/5.0 Firefox/68.0 PaleMoon/30.0.1
OS: Windows_NT 6.1
Safe Mode: false

Extensions
----------

Name: Greasemonkey for Pale Moon
Version: 3.31.4
Enabled: true
ID: greasemonkeyforpm@janekptacijarabaci

Name: Pardus Utility Collection
Version: 1.3.2
Enabled: true
ID: puc@fantamondi.it

Graphics
--------
Features
Compositing: Direct3D 11
GPU Accelerated Windows: 1/1 Direct3D 11 (OMTC)
Description: NVIDIA Quadro K4100M

Important Modified Preferences
------------------------------
accessibility.typeaheadfind.flashBar: 0
browser.cache.disk.capacity: 358400
browser.cache.disk.filesystem_reported: 1
browser.cache.disk.smart_size.first_run: false
browser.cache.disk.smart_size.use_old_max: false
browser.download.importedFromSqlite: true
browser.places.smartBookmarksVersion: 4
browser.startup.homepage_override.buildID: 20220319211940
browser.startup.homepage_override.mstone: 5.0.0
browser.tabs.onTop: true
extensions.lastAppVersion: 30.0.1
font.internaluseonly.changed: true
general.useragent.updates.lastupdated: 1648074970918
gfx.crash-guard.d3d11layers.appVersion: 30.0.1
gfx.crash-guard.d3d11layers.deviceID: 0x11b7
gfx.crash-guard.d3d11layers.driverVersion: 25.21.14.1678
gfx.crash-guard.d3d11layers.feature-d2d: true
gfx.crash-guard.d3d11layers.feature-d3d11: true
gfx.crash-guard.status.d3d11layers: 2
gfx.crash-guard.status.d3d9video: 2
gfx.direct3d.last_used_feature_level_idx: 0
media.benchmark.vp9.fps: 159
media.benchmark.vp9.versioncheck: 3
media.hardware-video-decoding.failed: true
network.cookie.prefsMigrated: true
places.database.lastMaintenance: 1647951981
places.history.expiration.transient_current_max_pages: 122334
plugin.importedState: true
privacy.sanitize.migrateFx3Prefs: true
services.sync.declinedEngines:
storage.vacuum.last.index: 0
storage.vacuum.last.places.sqlite: 1648074497

User avatar
sidology
Moon lover
Moon lover
Posts: 79
Joined: 2021-12-04, 22:07

Re: v30 bugs

Unread post by sidology » 2022-03-24, 13:17

SzakiLaci wrote:
2022-03-24, 12:49
Currently searching a way to downgrade back to 29.4.4
Install 29.4.5 and problem solved https://www.palemoon.org/download.shtml

User avatar
SlySven
Hobby Astronomer
Hobby Astronomer
Posts: 26
Joined: 2018-07-07, 22:42

Re: v30 bugs

Unread post by SlySven » 2022-03-24, 15:19

unknownone wrote:... Another issue is that passwords are not auto-filled.
I'm getting that - I'm not even seeing the hover "list of potential user-names to select a password from".

Windows 10 (64 bit) + PM 30.0.0 + English (British) Language Pack

Annoying, but given the current state of play, not something I can't live with - I can still retrieve passwords manually from the "Saved Logins" bit of the preferences...


I can see a light at the end of the tunnel...
...I'm just hoping it isn't a train coming in the opposite direction!

Potkeny
Fanatic
Fanatic
Posts: 129
Joined: 2018-08-03, 17:00

Re: v30 bugs

Unread post by Potkeny » 2022-03-24, 15:54

SlySven wrote:
2022-03-24, 15:19
I'm getting that - I'm not even seeing the hover "list of potential user-names to select a password from".
I had that, this solved it for me:
Moonchild wrote:
2022-03-19, 00:31
Please check in about:config if you have a user-set preference called privacy.donottrackheader.enabled
If you do, right-click it, select "reset" and then restart your browser.

There's a code typo in Pale Moon 30.0.0 that causes issues when this preference (no longer in use in this milestone) is set.

User avatar
snotty
Hobby Astronomer
Hobby Astronomer
Posts: 18
Joined: 2018-09-01, 21:37
Location: Austria

Re: v30 bugs

Unread post by snotty » 2022-03-24, 17:04

fwiw, the empty quickdial is among the things fixed by the tab-mix plus update here https://bitbucket.org/onemen/tabmixplus/downloads/

User avatar
SzakiLaci
Newbie
Newbie
Posts: 5
Joined: 2022-03-24, 12:25

Re: v30 bugs

Unread post by SzakiLaci » 2022-03-24, 20:26

sidology wrote:
2022-03-24, 13:17
Install 29.4.5 and problem solved https://www.palemoon.org/download.shtml
Thanks, I've installed 29.4.4 actually, because I had that, before it auto-updated to 3.0.0 >> than 3.0.1.
Why is there 29.4.5 officially there, if I've got 3.x auto-installed?
Am I in some kind of "beta tester program" I don't know about?

- Are the developers aware of this problem I've showed at my picture?
- Did they revoke 3.x ?

User avatar
Nigaikaze
Board Warrior
Board Warrior
Posts: 1322
Joined: 2014-02-02, 22:15
Location: Chicagoland

Re: v30 bugs

Unread post by Nigaikaze » 2022-03-24, 20:51

SzakiLaci wrote:
2022-03-24, 20:26
- Are the developers aware of this problem I've showed at my picture?
- Did they revoke 3.x ?
It is always helpful to pay attention to posts in the Announcements section of the forum. Had you done so, you would've seen this: viewtopic.php?f=1&t=28054
Nichi nichi kore ko jitsu = Every day is a good day.

Locked