v30 bugs Topic is solved
Forum rules
Please keep everything here strictly on-topic.
This board is meant for Pale Moon source code development related subjects only like code snippets, patches, specific bugs, git, the repositories, etc.
This is not for tech support! Please do not post tech support questions in the "Development" board!
Please make sure not to use this board for support questions. Please post issues with specific websites, extensions, etc. in the relevant boards for those topics.
Please keep things on-topic as this forum will be used for reference for Pale Moon development. Expect topics that aren't relevant as such to be moved or deleted.
Please keep everything here strictly on-topic.
This board is meant for Pale Moon source code development related subjects only like code snippets, patches, specific bugs, git, the repositories, etc.
This is not for tech support! Please do not post tech support questions in the "Development" board!
Please make sure not to use this board for support questions. Please post issues with specific websites, extensions, etc. in the relevant boards for those topics.
Please keep things on-topic as this forum will be used for reference for Pale Moon development. Expect topics that aren't relevant as such to be moved or deleted.
Re: v30 bugs
"Sometimes, the best way to get what you want is to be a good person." -- Louis Rossmann
"Seek wisdom, not knowledge. Knowledge is of the past; wisdom is of the future." -- Native American proverb
"Linux makes everything difficult." -- Lyceus Anubite
"Seek wisdom, not knowledge. Knowledge is of the past; wisdom is of the future." -- Native American proverb
"Linux makes everything difficult." -- Lyceus Anubite
- somdcomputerguy
- Lunatic
- Posts: 384
- Joined: 2014-02-23, 17:25
- Location: Greenbrier County, West Virginia
- Contact:
Re: v30 bugs
Well I agree with the TMP width issue, I experience it also, but it seems that's the only issue I've found with this extension. I'm not too worried about it though.. I can't say anything about quick dial issues, as I don't use that 'feature'.
-bruce /* somdcomputerguy.com */
'If you change the way you look at things, the things you look at change.'
'If you change the way you look at things, the things you look at change.'
Re: v30 bugs
Same issue here for me with TMP. It doesn't seem to be working at all as I've also lost the individual "close" icons on each tab. Tried re-installing the extension from the PM Extensions page, no effect
- Kand_in_Sky
- Fanatic
- Posts: 130
- Joined: 2013-01-02, 18:22
- Location: DE
Re: v30 bugs
Oh wow! PM30 is really a milestone, clearly faster on my not-so-new AMD 2015 QuadCore
congratulations & thanks
for the bugs (not really bugs)
- Notebook Win7: Quickdial is empty
- PC Win7: Quickdial works (main PC)
- PC Win10: Quickdial works
Language is set to english, and yes
-> language pack is installed
-> general.useragent.locale is set to de
- the polyfill add-on does not work, only because of the new GUID
for TMP: i use Tab Utilies Phoenix, there are no problems in PM30 so far
https://addons-legacy.palemoon.org/addo ... s-phoenix/
all in all: PM30 rocks
edit:
fyi: mobile site mdr.de still crashes --> viewtopic.php?f=7&t=27931
but as was me the only one with this problem, not really a bug
congratulations & thanks
for the bugs (not really bugs)
- Notebook Win7: Quickdial is empty
- PC Win7: Quickdial works (main PC)
- PC Win10: Quickdial works
Language is set to english, and yes
-> language pack is installed
-> general.useragent.locale is set to de
- the polyfill add-on does not work, only because of the new GUID
for TMP: i use Tab Utilies Phoenix, there are no problems in PM30 so far
https://addons-legacy.palemoon.org/addo ... s-phoenix/
all in all: PM30 rocks
edit:
fyi: mobile site mdr.de still crashes --> viewtopic.php?f=7&t=27931
but as was me the only one with this problem, not really a bug
PaleMoon & Basilisk
- on 2014 i5-4210M Notebook 8GB Win7 64Bit
- on 2014 Athlon 5350 16GB PC Win7 64Bit
- on 2018 Athlon200GE 32GB PC Win10 64Bit
- on 2014 i5-4210M Notebook 8GB Win7 64Bit
- on 2014 Athlon 5350 16GB PC Win7 64Bit
- on 2018 Athlon200GE 32GB PC Win10 64Bit
Re: v30 bugs
As for the quickdial: did you inadvertently click the "grid" icon in the top right? because that would result in your display shown, when disabling the grid.
"Sometimes, the best way to get what you want is to be a good person." -- Louis Rossmann
"Seek wisdom, not knowledge. Knowledge is of the past; wisdom is of the future." -- Native American proverb
"Linux makes everything difficult." -- Lyceus Anubite
"Seek wisdom, not knowledge. Knowledge is of the past; wisdom is of the future." -- Native American proverb
"Linux makes everything difficult." -- Lyceus Anubite
Re: v30 bugs
grid symbol untouched, empty quickdial stays empty when grid thing clicked (win7 PC)
i can not put new stuff there is the bigger problem. dragging a bookmark there opens the page.
tab-mix plus is one of two reasons i'm using palemoon (old search being the other), limiting tab width - for me - is essential
as to the close icons: the close buttons on tabs only appear on active tabs now, not on hover.
i can not put new stuff there is the bigger problem. dragging a bookmark there opens the page.
tab-mix plus is one of two reasons i'm using palemoon (old search being the other), limiting tab width - for me - is essential
as to the close icons: the close buttons on tabs only appear on active tabs now, not on hover.
-
- Moonbather
- Posts: 52
- Joined: 2017-03-29, 00:15
Re: v30 bugs
I also have an empty quickdial with only the search box after upgrading to v30 and the individual "close" icons on each tab are not visible until clicking on each specific tab. Another issue is that passwords are not auto-filled.
Re: v30 bugs
The only thing I've found to get the quickdial to work again is to create a new profile. I've tried resetting the various newtab settings, even clearing out the pinned pages to start fresh, still nothing. Something about the upgrade process is broken there.
Edit: It appears the privacy.donottrackheader.enabled setting is also connected to the quickdial not working. After resetting it, then restarting the browser, quickdial works again.
Edit: It appears the privacy.donottrackheader.enabled setting is also connected to the quickdial not working. After resetting it, then restarting the browser, quickdial works again.
Re: v30 bugs
Perhaps @RealityRipple can dive into this privacy.donottrackheader.enabled issue since it was his code that was used to base the GPC implementation and removal of DNT on. It's probably something simple that just breaks a piece of front-end, but no less annoying anyway, of course.
The pref serves no purpose and if it wasn't for a typo on my end it would actually have been automatically cleared upon upgrade... and nobody would even have known about this
The pref serves no purpose and if it wasn't for a typo on my end it would actually have been automatically cleared upon upgrade... and nobody would even have known about this
"Sometimes, the best way to get what you want is to be a good person." -- Louis Rossmann
"Seek wisdom, not knowledge. Knowledge is of the past; wisdom is of the future." -- Native American proverb
"Linux makes everything difficult." -- Lyceus Anubite
"Seek wisdom, not knowledge. Knowledge is of the past; wisdom is of the future." -- Native American proverb
"Linux makes everything difficult." -- Lyceus Anubite
Re: v30 bugs
Since normally keep 50+ tabs open in Pale Moon I need to scroll through tabs a lot.
The "Tab" button for scrolling through tabs to the left now is at the right side next the to button the scroll to the right.
I liked it at the left side as some quick click on it scroll the open tabs quickly to the first tab.
Not only it moved to the right, the button to the left behaves differently from the right to the right.
I still can scroll quickly to the right by some quick clicks, but not to the left. The tabs just scrolls a little to the left and then back to the right.
Anyone else noticed this?
The "Tab" button for scrolling through tabs to the left now is at the right side next the to button the scroll to the right.
I liked it at the left side as some quick click on it scroll the open tabs quickly to the first tab.
Not only it moved to the right, the button to the left behaves differently from the right to the right.
I still can scroll quickly to the right by some quick clicks, but not to the left. The tabs just scrolls a little to the left and then back to the right.
Anyone else noticed this?
Re: v30 bugs
I'm using Pale Moone since many years, and NEVER had any problems with it.
Until v30 came out.
Every 5th or 10 click I get a screen like this: Instead of that: It seems like the cache is not used properly.
(Currently searching a way to downgrade back to 29.4.4)
Ps: I'm a programmer since 35 years. I hate the current world turning into a global "every user is a test-subject" behavior.
Ps2: I'm using Pale Moon for one page only: https://www.pardus.at Nothing else, because this browser is still supporting Greasemonkey + Pardus scripts.
Application Basics
------------------
Name: Pale Moon
Version: 30.0.1 (32-bit)
Build ID: 20220319211940
Update Channel: release
User Agent: Mozilla/5.0 (Windows NT 6.1; WOW64; rv:68.0) Gecko/20100101 Goanna/5.0 Firefox/68.0 PaleMoon/30.0.1
OS: Windows_NT 6.1
Safe Mode: false
Extensions
----------
Name: Greasemonkey for Pale Moon
Version: 3.31.4
Enabled: true
ID: greasemonkeyforpm@janekptacijarabaci
Name: Pardus Utility Collection
Version: 1.3.2
Enabled: true
ID: puc@fantamondi.it
Graphics
--------
Features
Compositing: Direct3D 11
GPU Accelerated Windows: 1/1 Direct3D 11 (OMTC)
Description: NVIDIA Quadro K4100M
Important Modified Preferences
------------------------------
accessibility.typeaheadfind.flashBar: 0
browser.cache.disk.capacity: 358400
browser.cache.disk.filesystem_reported: 1
browser.cache.disk.smart_size.first_run: false
browser.cache.disk.smart_size.use_old_max: false
browser.download.importedFromSqlite: true
browser.places.smartBookmarksVersion: 4
browser.startup.homepage_override.buildID: 20220319211940
browser.startup.homepage_override.mstone: 5.0.0
browser.tabs.onTop: true
extensions.lastAppVersion: 30.0.1
font.internaluseonly.changed: true
general.useragent.updates.lastupdated: 1648074970918
gfx.crash-guard.d3d11layers.appVersion: 30.0.1
gfx.crash-guard.d3d11layers.deviceID: 0x11b7
gfx.crash-guard.d3d11layers.driverVersion: 25.21.14.1678
gfx.crash-guard.d3d11layers.feature-d2d: true
gfx.crash-guard.d3d11layers.feature-d3d11: true
gfx.crash-guard.status.d3d11layers: 2
gfx.crash-guard.status.d3d9video: 2
gfx.direct3d.last_used_feature_level_idx: 0
media.benchmark.vp9.fps: 159
media.benchmark.vp9.versioncheck: 3
media.hardware-video-decoding.failed: true
network.cookie.prefsMigrated: true
places.database.lastMaintenance: 1647951981
places.history.expiration.transient_current_max_pages: 122334
plugin.importedState: true
privacy.sanitize.migrateFx3Prefs: true
services.sync.declinedEngines:
storage.vacuum.last.index: 0
storage.vacuum.last.places.sqlite: 1648074497
Until v30 came out.
Every 5th or 10 click I get a screen like this: Instead of that: It seems like the cache is not used properly.
(Currently searching a way to downgrade back to 29.4.4)
Ps: I'm a programmer since 35 years. I hate the current world turning into a global "every user is a test-subject" behavior.
Ps2: I'm using Pale Moon for one page only: https://www.pardus.at Nothing else, because this browser is still supporting Greasemonkey + Pardus scripts.
Application Basics
------------------
Name: Pale Moon
Version: 30.0.1 (32-bit)
Build ID: 20220319211940
Update Channel: release
User Agent: Mozilla/5.0 (Windows NT 6.1; WOW64; rv:68.0) Gecko/20100101 Goanna/5.0 Firefox/68.0 PaleMoon/30.0.1
OS: Windows_NT 6.1
Safe Mode: false
Extensions
----------
Name: Greasemonkey for Pale Moon
Version: 3.31.4
Enabled: true
ID: greasemonkeyforpm@janekptacijarabaci
Name: Pardus Utility Collection
Version: 1.3.2
Enabled: true
ID: puc@fantamondi.it
Graphics
--------
Features
Compositing: Direct3D 11
GPU Accelerated Windows: 1/1 Direct3D 11 (OMTC)
Description: NVIDIA Quadro K4100M
Important Modified Preferences
------------------------------
accessibility.typeaheadfind.flashBar: 0
browser.cache.disk.capacity: 358400
browser.cache.disk.filesystem_reported: 1
browser.cache.disk.smart_size.first_run: false
browser.cache.disk.smart_size.use_old_max: false
browser.download.importedFromSqlite: true
browser.places.smartBookmarksVersion: 4
browser.startup.homepage_override.buildID: 20220319211940
browser.startup.homepage_override.mstone: 5.0.0
browser.tabs.onTop: true
extensions.lastAppVersion: 30.0.1
font.internaluseonly.changed: true
general.useragent.updates.lastupdated: 1648074970918
gfx.crash-guard.d3d11layers.appVersion: 30.0.1
gfx.crash-guard.d3d11layers.deviceID: 0x11b7
gfx.crash-guard.d3d11layers.driverVersion: 25.21.14.1678
gfx.crash-guard.d3d11layers.feature-d2d: true
gfx.crash-guard.d3d11layers.feature-d3d11: true
gfx.crash-guard.status.d3d11layers: 2
gfx.crash-guard.status.d3d9video: 2
gfx.direct3d.last_used_feature_level_idx: 0
media.benchmark.vp9.fps: 159
media.benchmark.vp9.versioncheck: 3
media.hardware-video-decoding.failed: true
network.cookie.prefsMigrated: true
places.database.lastMaintenance: 1647951981
places.history.expiration.transient_current_max_pages: 122334
plugin.importedState: true
privacy.sanitize.migrateFx3Prefs: true
services.sync.declinedEngines:
storage.vacuum.last.index: 0
storage.vacuum.last.places.sqlite: 1648074497
Re: v30 bugs
Install 29.4.5 and problem solved https://www.palemoon.org/download.shtml
Re: v30 bugs
I'm getting that - I'm not even seeing the hover "list of potential user-names to select a password from".unknownone wrote:... Another issue is that passwords are not auto-filled.
Windows 10 (64 bit) + PM 30.0.0 + English (British) Language Pack
Annoying, but given the current state of play, not something I can't live with - I can still retrieve passwords manually from the "Saved Logins" bit of the preferences...
I can see a light at the end of the tunnel...
Re: v30 bugs
I had that, this solved it for me:
Moonchild wrote: ↑2022-03-19, 00:31Please check in about:config if you have a user-set preference called privacy.donottrackheader.enabled
If you do, right-click it, select "reset" and then restart your browser.
There's a code typo in Pale Moon 30.0.0 that causes issues when this preference (no longer in use in this milestone) is set.
Re: v30 bugs
fwiw, the empty quickdial is among the things fixed by the tab-mix plus update here https://bitbucket.org/onemen/tabmixplus/downloads/
Re: v30 bugs
Thanks, I've installed 29.4.4 actually, because I had that, before it auto-updated to 3.0.0 >> than 3.0.1.sidology wrote: ↑2022-03-24, 13:17Install 29.4.5 and problem solved https://www.palemoon.org/download.shtml
Why is there 29.4.5 officially there, if I've got 3.x auto-installed?
Am I in some kind of "beta tester program" I don't know about?
- Are the developers aware of this problem I've showed at my picture?
- Did they revoke 3.x ?
Re: v30 bugs
It is always helpful to pay attention to posts in the Announcements section of the forum. Had you done so, you would've seen this: viewtopic.php?f=1&t=28054
Nichi nichi kore ko jitsu = Every day is a good day.