Updating to version 25.0.2
Moderator: trava90
Forum rules
This board is for technical/general usage questions and troubleshooting for the Pale Moon browser only.
Technical issues and questions not related to the Pale Moon browser should be posted in other boards!
Please keep off-topic and general discussion out of this board, thank you!
This board is for technical/general usage questions and troubleshooting for the Pale Moon browser only.
Technical issues and questions not related to the Pale Moon browser should be posted in other boards!
Please keep off-topic and general discussion out of this board, thank you!
Updating to version 25.0.2
Hello,
My Linux Mint 17 Atom machine is currently running version 24.7.2 (x86).
I would like to move to version 25 but I am unsure how to do it. Could you please confirm that (based on the SourceForge wiki),
I should:
1. Delete my existing installation - but how? Installed via the pminstaller. Do I simply delete /opt/palemoon?
2. Download the latest pminstaller
3. Execute tar -xvf <palemoon_archive> -C /opt
Thank you.
My Linux Mint 17 Atom machine is currently running version 24.7.2 (x86).
I would like to move to version 25 but I am unsure how to do it. Could you please confirm that (based on the SourceForge wiki),
I should:
1. Delete my existing installation - but how? Installed via the pminstaller. Do I simply delete /opt/palemoon?
2. Download the latest pminstaller
3. Execute tar -xvf <palemoon_archive> -C /opt
Thank you.
Re: Updating to version 25.0.2
You just need to run pminstaller on your system. You do not have to worry about anything else.
The other steps are entirely meant for a manual installation.
The other steps are entirely meant for a manual installation.
Re: Updating to version 25.0.2
Thank you for your very prompt reply.
I'm sorry but that has not worked!
Double clicked on pminstaller.sh and was greeted by an error message:
"Pluma has been unable to check the character encoding. Please check you are not trying to open a binary file. Select a character encoding from the menu and try again" (It is set to 'Character encoding - Automatically detected')
What have I done wrong?
I'm sorry but that has not worked!
Double clicked on pminstaller.sh and was greeted by an error message:
"Pluma has been unable to check the character encoding. Please check you are not trying to open a binary file. Select a character encoding from the menu and try again" (It is set to 'Character encoding - Automatically detected')
What have I done wrong?
Re: Updating to version 25.0.2
Some file managers are in the habit of seeing executable shell scripts as text files and try to open them as such. That's what you are seeing here.
You need to run it from the terminal. For details, please read the README file bundled in the installer archive.
You need to run it from the terminal. For details, please read the README file bundled in the installer archive.
Re: Updating to version 25.0.2
Sorry, still having problems. (Please be patient with me...!)
I have ensured that pminstaller-0.1.6.tar.bz2 is in my home directory. When I go to the Terminal and type pminstaller.sh at the prompt I am told 'command not found'.
Help!
I have ensured that pminstaller-0.1.6.tar.bz2 is in my home directory. When I go to the Terminal and type pminstaller.sh at the prompt I am told 'command not found'.
Help!
Re: Updating to version 25.0.2
Are you logged in as admin/root? If yes try
or
That works at least on Ubuntu Trusty, should be similar to Mint 17.
EDIT: You are using Mint Mate? That uses Caja as a file manager and Caja is a fork of Nautilus which is the default in Ubuntu and that one has problems identifying the script as an executable, so maybe the forked that problem as well . I had a similar problem until I switched to Nemo.
Code: Select all
sudo bash pminstaller.sh
Code: Select all
sudo ./pminstaller.sh
EDIT: You are using Mint Mate? That uses Caja as a file manager and Caja is a fork of Nautilus which is the default in Ubuntu and that one has problems identifying the script as an executable, so maybe the forked that problem as well . I had a similar problem until I switched to Nemo.
Re: Updating to version 25.0.2
SvenG - That solved my problem, very many thanks. Pale Moon 25.0.2 up and running. Yes, running Mint Mate.
Thanks also to access2godzilla for pointing me in the right direction.
Thanks also to access2godzilla for pointing me in the right direction.
Re: Updating to version 25.0.2
For the record, you don't even have to run it with sudo/su. Just execute the script with "./pminstaller.sh"; it will automatically ask for elevation.
Re: Updating to version 25.0.2
Doing that from my admin account in Trusty that results in:access2godzilla wrote:Just execute the script with "./pminstaller.sh"; it will automatically ask for elevation.
Code: Select all
/usr/bin/sudo
No protocol specified
(yad:13798): Gtk-WARNING **: cannot open display: :0
Re: Updating to version 25.0.2
This should not be happening... I'll have to look into this.
You are using the latest version of the installer, I'd assume?
You are using the latest version of the installer, I'd assume?
Re: Updating to version 25.0.2
SvenG wrote:Doing that from my admin account in Trusty that results in:The installer only pops up when you sudo it.Code: Select all
/usr/bin/sudo No protocol specified (yad:13798): Gtk-WARNING **: cannot open display: :0
So does this mean you are running './pminstaller.sh' logged into X as 'root' or in a x-terminal window sudo'd to 'root'? If so, that could explain why you see that error when running './pminstaller.sh'?Doing that from my admin account in Trusty...
.
Re: Updating to version 25.0.2
Damn, yeah, sure. So used to su into my admin account in the terminal to do all kinds of things console. Haven't opened the actual account for six month now
Still no need for two quotes
Still no need for two quotes
Re: Updating to version 25.0.2
SvenG, if you could answer my previous question it might help me to fix this bug.
Does the password prompt appear for you?
Does the password prompt appear for you?
Re: Updating to version 25.0.2
I would have answered if I would have seen it, sorry. Yes, I used the latest version.access2godzilla wrote:SvenG, if you could answer my previous question it might help me to fix this bug.
Anyway, it appears to be not a bug cause it needs the sudo when su'ing into the admin account from a normal account in the console instead of running it directly in the admin account when doing that you don't need the sudo.
Re: Updating to version 25.0.2
I seem to have not made it sufficiently clear: if you run it as a non-admin (without sudo/su), does it ask for the password?
The expected behaviour is that it should ask for the password.
The expected behaviour is that it should ask for the password.
Re: Updating to version 25.0.2
Yes, it does but can't do anything cause it doesn't have the respective rights.access2godzilla wrote:I seem to have not made it sufficiently clear: if you run it as a non-admin (without sudo/su), does it ask for the password?
The expected behaviour is that it should ask for the password.
Re: Updating to version 25.0.2
On Linux Mint 17, I downloaded the installer and expanded it into my Home directory and did a double-click on pminstaller.sh to run the script. I was asked for my password and then I was able to quickly install Pale Moon. There was no issue of rights, maybe because I was in my Home directory and didn't need any additional rights there. Just a thought...SvenG wrote:Yes, it does but can't do anything cause it doesn't have the respective rights.access2godzilla wrote:I seem to have not made it sufficiently clear: if you run it as a non-admin (without sudo/su), does it ask for the password?
The expected behaviour is that it should ask for the password.
OLee