Invalid signatures Topic is solved

[Pentium4User]

And also make sure the old key is removed.
You can show them via

Code: Select all

apt-key list

[Ez-waker]

If you still have the original Release.key file sitting in the same place as you try and download a new one, curl will give it a different name. Always run "rm -f Release.key" before downloading a new one.

If that doesn't work, please give us the terminal output of the repo setup commands.

And also make sure the old key is removed.
You can show them via

Code: Select all

apt-key list

Thanks to you both. Removing the key was the key.

[Python54]

29.0.0 is not building for amd64 for 20.04, for reasons I don't really know yet. It builds for ARM 64, armhf (32-bit like on the Pi), and for x86 32-bit systems, and has no issues building on 18.04 and 20.10. Perhaps it's some new problem with gcc-9 on that architecture, AFAIK, that's the only distro now that my PM's building against with that version.

This is going to take time and effort to diagnose. Right now I'm trying a build in an sbuild 20.04 schroot on my laptop to see if that fails.

Palemoon v29.0.0 appeared in Update Manager on my Mint 20.1/20.04 PC this morning and is now installed OK. Thanks for fixing the problem Steve

[oscar]

@Steve pusser
I also get the message, that key EXPKEYSIG 0FAD31CA8719FCE4 is expired. I run ubuntu 18.04.
Lots of different commands and links have been posted, about how to solve this issue, by different members.
could you please offer a step by step way to download the new key for ubuntu 18.04?
or do you consider the problem for 18.04 solved at some point?
I'm a bit scared to mess things up completely
kind regards oscar

[New Tobin Paradigm]

If you are scared then you shouldn't be using Linux.

[Moonchild]

If you are scared then you shouldn't be using Linux.

I should print and frame that.

[Pentium4User]

@Steve pusser
I also get the message, that key EXPKEYSIG 0FAD31CA8719FCE4 is expired. I run ubuntu 18.04.
Lots of different commands and links have been posted, about how to solve this issue, by different members.
could you please offer a step by step way to download the new key for ubuntu 18.04?
or do you consider the problem for 18.04 solved at some point?
I'm a bit scared to mess things up completely
kind regards oscar

Please show the output of the commands you ran.

[oscar]

Pentium4user wrote:
"please show the output of the commands you ran"

I'd be happy to, but it's in danish.
However it's the same text as the one sent by Alerche tue.feb.02 8:32

"Fehl:4 http://download.opensuse.org/repositori ... /Debian_10 InRelease
Die folgenden Signaturen waren ungültig: EXPKEYSIG 0FAD31CA8719FCE4 home:stevenpusser OBS Project <home:stevenpusser@build.opensuse.org>
W: Während der Überprüfung der Signatur trat ein Fehler auf. Das Depot wurde nicht aktualisiert und die vorherigen Indexdateien werden verwendet. GPG-Fehler: http://download.opensuse.org/repositori ... /Debian_10 InRelease: Die folgenden Signaturen waren ungültig: EXPKEYSIG 0FAD31CA8719FCE4 home:stevenpusser OBS Project <home:stevenpusser@build.opensuse.org>
W: Fehlschlag beim Holen von http://download.opensuse.org/repositori ... /InRelease Die folgenden Signaturen waren ungültig: EXPKEYSIG 0FAD31CA8719FCE4 home:stevenpusser OBS Project <home:stevenpusser@build.opensuse.org>
W: Einige Indexdateien konnten nicht heruntergeladen werden. Sie wurden ignoriert oder alte an ihrer Stelle benutzt."

only difference is that my output refers to: "http://download.opensuse.org/repositori ... untu_18.04 InRelease"
I hope you understand german. otherwise I'll try to translate into english

[oscar]

sorry, I meant:
http://download.opensuse.org/repositori ... untu_18.04 InRelease

[Pentium4User]

Show the output of

Code: Select all

sudo apt-key del "F961 1EC6 ADCF DD30 3362 217A 0FAD 31CA 8719 FCE4"
sudo apt-key list
 

[oscar]

/etc/apt/trusted.gpg
--------------------
pub rsa2048 2017-04-05 [SC] [udløber: 2021-02-27]
E64C 7A04 DC65 3D07 ACA3 EA58 5E62 D791 625A 271E
uid [ ukendt] home:hawkeye116477 OBS Project <home:hawkeye116477@build.opensuse.org>

/etc/apt/trusted.gpg.d/ubuntu-keyring-2012-archive.gpg
------------------------------------------------------
pub rsa4096 2012-05-11 [SC]
790B C727 7767 219C 42C8 6F93 3B4F E6AC C0B2 1F32
uid [ ukendt] Ubuntu Archive Automatic Signing Key (2012) <ftpmaster@ubuntu.com>

/etc/apt/trusted.gpg.d/ubuntu-keyring-2012-cdimage.gpg
------------------------------------------------------
pub rsa4096 2012-05-11 [SC]
8439 38DF 228D 22F7 B374 2BC0 D94A A3F0 EFE2 1092
uid [ ukendt] Ubuntu CD Image Automatic Signing Key (2012) <cdimage@ubuntu.com>

/etc/apt/trusted.gpg.d/ubuntu-keyring-2018-archive.gpg
------------------------------------------------------
pub rsa4096 2018-09-17 [SC]
F6EC B376 2474 EDA9 D21B 7022 8719 20D1 991B C93C
uid [ ukendt] Ubuntu Archive Automatic Signing Key (2018) <ftpmaster@ubuntu.com>


"ukendt" means: unknown

[oscar]

@Pentium4user
the output for:
sudo apt-key del "F961 1EC6 ADCF DD30 3362 217A 0FAD 31CA 8719 FCE4"
was a plain: OK

[Pentium4User]

Now

Code: Select all

curl -fsSL https://download.opensuse.org/repositories/home:stevenpusser/xUbuntu_20.10/Release.key | gpg --dearmor | sudo tee /etc/apt/trusted.gpg.d/home_stevenpusser.gpg > /dev/null
sudo apt update

[oscar]

it seems like the command to follow (and thanks for helping our. I really appreciate) is meant for xUbuntu 20.10?
I'm on 18.04

[Pentium4User]

regardless, file is the same (I checked the md5 checksum).

[oscar]

I had to install curl.
ran your command afterwards and voila! the upgrade to 29.0.0 succeeded
thank you for good support. you made my day

[jobbautista9]

I'm pretty sure you can do that in wget as well.